Introduction:
| CO2 laser surgical system Therapy Principle |
The angle of radiation of CO2 laser is very small and its energy density is high. Output power density will reach several kilowatts per square cm. if it is focused. So the boiloff and cautery of focus tissue can be used in the therapy. Also if it isn't focused, the laser radiating focus tissue can bring about concretion effect.
CO2 laser surgical system outputs infrared rays which wavelength is 10600nm . Its penetrability is comparative large. Because it can incise focus tissue after focusing, CO2 laser surgical system is also considered as laser scalpel. If beam of laser is enlarged, it is good for the heating-up physical therapy of the deepest tissue.
According to the output power, CO2 laser therapy instrument has three kind: great type, medium type and desktop type.
Refer the pictures to read details. |
| CO2 laser surgical system Applications |
1. Dermatology: facial cosmetology, body freckle, nevus, tumour, wart, skin cancer, the instrument can excise anything superfluous or useless in order to make people strong and handsome and to prevent pathological changing.
2. E.N.T: all kinds of rhinitises, nose polyps, pharyngitises, oral hemangiomas.
3. Ophthalmology: orbit tumour, eyelid, sty, double blood skin.
4. Gynecology: chronic cervicitis, valvar angiofibromata, cervical erosion, leukoplakiavulvae, excesion uterus polyp , cervical carcinoma in situs, etc.
5. General surgery: haemorrhoids, aal fissure and anal fistula, phimosis, V.D. etc.
6. Others: underarm odour, corn, ulcer.
|
| CL40 Specifications |
|
Laser wavelength |
10600nm |
| Continuous Output power |
>25W (>30W) |
|
Focal spot diameter |
<0.5mm |
| operation mode |
CW\single\Repeat pulse\super pulse |
|
articulated arm |
7-joint spring-balanced |
| Working radius |
110cm |
| Aiming beam |
Diode laser 635nm\2mW |
| Aiming beam mode |
CW \ Repeat pulse\sans |
|
Power supply |
AC220V or 110V |
| Dimension |
400×220×900 mm |
| Packing size |
540×500×1220 mm |
| Gross weight |
37kg (Net weight 18kg ) | |
|
Computer control Function |
1.Function of sets exact laser power in advance and the power can be set in advance from 0.5w to 25w
2.Many kinds of work methods: cont, single, repeat pulse, and optional super pulse to content with the need of different operation;
3.Red indicate laser has many kinds work mode as pulse, cont, display when aiming, undiscovered when working and so on. This function made the operation horizon more clearly
4. Automatically test the obstacle (8 kinds) and notice the user by displaying figure.
|
| Laser output Model |
|
CONT: laser control by feet switch, cont output.
SINGL: output single pulse laser, the adjustable scope of pulse width is (0.02S-1S).
REPEAT: output repeat laser pulse, the adjustable scope of each pulse width is(0.02S-1S).
Super Pulse: each pulse width of the output laser is quite narrow ,the adjustable scope of interval of pulse is (0.02S-1S).
|
|
Super pulse Function |
Using super pulse can be better to reduce hot damage around the target organ .The super pulse width is extremely short(0.1mS)and it hope that around the target organ can be cooled at interval of pulse. This machine has blowing function, which the heat can be blow away at interval of pulse and the pulse interval time adjustable from 0.01S to 1S(the fixed work width of pulse is 0.1-0.9mS).Advice that select longer interval time when the output power is major, and select short interval time when the output power is small. Made the interval time longer than hot organ cont time which may maximum reduce the water tumefaction after operation.
|
| Standard Inclosure |
|
Optional Heads |
Safety feet Switch |
Laser goggle |
Standard Head |
|
|
|
|
|
| accessories need to pay if you buy |
|
Laser output Heads F=50mm small facula |
Special heads for ENT department |
|
|
|
2 |
|
